THE INDUSTRIAL
CENTRAL VACUUM SYSTEM

STARVAC systems are assembled with the best quality components. Automation and maintenance are designed with plug & play solutions, to couple with new Industry 4.0 standards.

HOW CLEANING
EVOLVED OVER TIME

INVENTED IN 1797

THE BROOM

While the broom was a revolutionary solution in 1797, today it’s use will not only be a waste of time, but also hazardous in some conditions! In addition, its use is strictly limited, since many areas, like sharp edges, or any winded place cannot even be cleaned.

PRO

Cheap.
Low maintenance cost.
Light and highly compact.

PRO

Cheap.
Low maintenance cost.
Light and highly compact.

CONTRA

SAFETY. In ATEX areas, explosion prevention prohibits its use.
HEALTH. Dust clouds may form and dust will be inhaled.
SLOW. High labor cost. Time wasting procedure.
Not flexible. Some areas cannot be reached.
Dust cloud go everywhere, spreading the dust even more.
Not hygienically enough for Food and Pharma.

L

PRO

Cheap.
Low maintenance cost.
Light and highly compact.

K

CONTRA

SAFETY. In ATEX areas, explosion prevention prohibits its use.
HEALTH. Dust clouds may form and dust will be inhaled.
SLOW. High labor cost. Time wasting procedure.
Not flexible. Some areas cannot be reached.
Dust cloud go everywhere, spreading the dust even more.
Not hygienically enough for Food and Pharma.

INVENTED IN 1901

THE VACUUM CLEANER

After over hundred years of brooming, finally something new came up. The vacuum cleaner. Powerful, heavy and loud back in the 20th century, thanks to a steady evolution, today domestic vacuum cleaners are light and high-tech. What about the industrial ones? Well. They are still, after more than 120 years, heavy, loud, and bulky.

IMPROVEMENTS vs BROOM

SAFETY. In ATEX areas, less dust clouds form.
HEALTH. Only limited dust clouds may form. Limited dust will be inhaled.
Hygienically enough for Food and Pharma.

IMPROVEMENTS vs BROOM
SAFETY. In ATEX areas, less dust clouds form.
HEALTH. Only limited dust clouds may form. Limited dust will be inhaled.
Hygienically enough for Food and Pharma.
WORSENING vs BROOM
Heavy and bulky vacuum cleaner to be pulled around.
Need to plug in Electricity.
Loud.
Space consuming.
Exhausted air in the same environment -> Spreading of small dust clouds.
High Maintenance cost (emptying dust container, filter cleaning).
“Filter clogged” issue.
L

IMPROVEMENTS vs BROOM

SAFETY. In ATEX areas, less dust clouds form.
HEALTH. Only limited dust clouds may form. Limited dust will be inhaled.
Hygienically enough for Food and Pharma.

K

WORSENING vs BROOM

Heavy and bulky vacuum cleaner to be pulled around.
Need to plug in Electricity.
Loud.
Space consuming.
Exhausted air in the same environment. Spreading of small dust clouds.
High Maintenance cost (emptying dust container, filter cleaning).
“Filter clogged” issue.

INVENTED IN 1912

THE CENTRAL VACUUM SYSTEM

Just a few years after the invention of the mobile vacuum cleaner, the central vacuum cleaner was invented. While in the domestic central vacuum cleaner is more comfort related, the industrial central vacuum cleaner is a game changer. While maximizing the cleaning efficiency, it also boosts safety and hygienically aspects to a maximum, thanks to the fact that the operator has no near blower and air is exhausted outside the working environment.

IMPROVEMENTS vs REGULAR VACUUM

SAFETY. In ATEX areas, no clouds form.
HEALTH. No dust clouds may form. Barely any dust will be inhaled.
Maximum hygienical aspects are kept. Recommended for clean room.
Only lightweigth accessories need to be carried.
No need to plugin electricity.
Silent.
Space saving.
Low maintenance cost thanks to big filter and Big Bag discharging.
Filter nearly ever cloggs up thanks to big filter surface and auto matic cleaning system.
Multiple contemporaneous operators.
60% faster cleaning process than regular vacuum cleaner.

IMPROVEMENTS vs REGULAR VACUUM

SAFETY. In ATEX areas, no clouds form.
HEALTH. No dust clouds may form. Barely any dust will be inhaled.
Maximum hygiene aspects are kept. Recommended for clean room.
Only lightweight accessories need to be carried.
No need to plugin electricity.
Silent.
Space saving.
Low maintenance cost thanks to big filter and Big Bag discharging.
Filter nearly ever cloggs up thanks to big filter surface and auto matic cleaning system.
Multiple contemporaneous operators.
60% faster cleaning process than regular vacuum cleaner.

WORSENING vs REGULAR VACUUM
Often higher initial cost, but short ROI times (generally 2-3 years).
Fixed piping system cannot be transported easily.
L

IMPROVEMENTS vs REGULAR VACUUM

SAFETY. In ATEX areas, no clouds form.
HEALTH. No dust clouds may form. Barely any dust will be inhaled.
Maximum hygiene aspects are kept. Recommended for clean room.
Only lightweight accessories need to be carried.
No need to plugin electricity.
Silent.
Space saving.
Low maintenance cost thanks to big filter and Big Bag discharging.
Filter nearly ever cloggs up thanks to big filter surface and auto matic cleaning system.
Multiple contemporaneous operators.
60% faster cleaning process than regular vacuum cleaner.

K

WORSENING vs REGULAR VACUUM

Often higher initial cost, but short ROI times (generally 2-3 years).
Fixed piping system cannot be transported easily.

Are you ready for a levelup?

nextlevelcleaning

STILL BROOMING?
Its time for an upgrade!

USING MOBILE VACUUM?
Anyway time for an upgrade!

FREE QUOTATION
Guarateed answer, within 24h.

Quotation

BENEFITS

Since the central vacuum unit is stationary and more powerful, but also located out of working environment and exhaust is outside, there are several clear benefits:

TIME
SAVING
Don’t let dust stop your production!
40% downtime reduction due to cleaning.

REDUCED INDOOR POLLUTION

All volatile dust is filtered and exhausted outside of the working rooms

SPACE
SAVING

No more incumbent & heavy portable vacuum cleaners to drag around

STEADY POWERFUL VACUUM

The large surface filters, with automatic reverse cleaning, let blowers run without loss of performance

LIGHTWEIGHT

Only a light flexible hose with proper accessories to grab and quick use

REDUCED
NOISE

Blowers are installed far away from working areas

RECOMMENDED
IN ALL INDUSTRIES

It’s perfect for all environments where the use of portable vacuum cleaners is difficult, for restricted space and ergonomics of production, or when portable vacuum cleaners are not efficient because of the dangerous and aggressive dust.

OVERVIEW

An industrial central vacuum system can be listed in 6 main parts:

1

BLOWER

2

SEPARATOR

Mechanical or cyclonic

3

CONTROL BOX

Can be a simple electric control box or include other sensors.

4

TUBING SYSTEM

Generally in metal, but also available in PVC.

5

INLET POINTS

From classical inlet valves to hose reels or other orifices.

6

CLEANING TOOLS

The vacuum accessories, flexible hoses and brushes.

VIDEO

 

1. The vacuum producer, named also blower;
2. The dust separator, mechanical or cyclonic;
3. The control device, which can be a simple electric control box or include other sensors;
4. The piping network, generally in metal, but also available in PVC.
5. The inlet points, from classical inlet valves to hose reels or other orifices;
6. The vacuum accessories, flexible hoses and brushes;

The central vacuum unit, made of blower, separator and control box, is usually installed in a technical room, far away from the operators, so it gives many benefits.

The piping network connects the central vacuum unit with many different suction points, which are strategically placed in order to reach every possible place needed.

WATCH VIDEO

When is the central
vacuum system a must?

a.

If it is essential to minimize cleaning times, such as on assembly lines.

b.

If constant and vigorous power is crucial, immediately to grab at your hand.

c.

If the spaces for handling a bulky and noisy wheeled vacuum cleaner are restricted.

d.

If the dust or scraps to be vacuumed are aggressive, toxic or simply bulky.

e.

If the working or production rooms are developed on vertical levels, such as silos.

f.

If no specks of dust are allowed in the area, as in clean or white rooms.

g.

If several operators have to vacuum simultaneously in a limited place.
BEFOREAFTER

APPLICATIONS

STARVAC offers a complete line of central vacuums for all industrial applications, including incinerators, bakeries, dental labs, carwash, etc.

Details

Starvac-OK!

Starvac-OK! is the IOT solution to correctly ensure vacuum cleaning operations all the time. It is an all-in-one device for the central vacuum advance management.

 

1. Continuous monitoring of suction power and dust loading on cartridge filters.
2. Monitoring all the system with a single interface, via the web, smartphone, SMS.
3. Alarm sent in real time when thresholds are exceeded.
4. Reports on data history, flue maintenance and analysis.
5. Alert-diary with deadlines for your systems.

Starvac-OK!

Starvac-OK! is the IOT solution to correctly ensure vacuum cleaning operations all the time. It is an all-in-one device for the central vacuum advance management.

1. Continuous monitoring of suction power and dust loading on cartridge filters.

2. Monitoring all the system with a single interface, via the web, smartphone, SMS.

3. Alarm sent in real time when thresholds are exceeded.

4. Reports on data history, flue maintenance and analysis.

5. Alert-diary with deadlines for your systems.

CERTIFICATIONS

Starvac company is certificated ISO 9001 and can achieve on the whole central vacuum system an ATEX Z22 standard.

Certificate of Conformity n. Q-2898-20
to ISO 9001:2015 standard

ATEX version Z22
Risk-free in case of organic dust

SYSTEM QUOTATION

Guaranteed answer, within 24 working hours.

Quotation

Phone: +40 790 510 816
E-mail: office@starvac.ro

www.starvac.ro

HEADQUARTER

Starvac SCS
via Rio Vallarsa, 5
I-39055 Laives (BZ)

WAREHOUSE

Starvac SCS
via Rio Vallarsa, 5
I-39055 Laives (Bz)

REGISTERED OFFICE

Starvac SCS ONLUS
Via Werner Von Siemens, 23
I-39100 Bolzano

EORI IT02989080219

Phone: +40 790 510 816
E-mail: office@starvac.ro

www.starvac.ro

HEADQUARTER

Starvac SCS
via Rio Vallarsa, 5
I-39055 Laives (BZ)

WAREHOUSE

Starvac SCS
via Rio Vallarsa, 5
I-39055 Laives (Bz)

REGISTERED OFFICE

Starvac SCS ONLUS
Via Werner Von Siemens, 23
I-39100 Bolzano

EORI IT02989080219